For many farmers, soil compaction and tire slippage are two major concerns that they know can affect yield and productivity. When soil becomes compacted, it cannot be easily penetrated by water, which can lead to lower yields. At the same time, without good traction in the soil, a farmer can see a loss in fuel efficiency and productivity. Compaction and slippage problems can be easily improved by minor adjustments to tires; but by making an adjustment that improves one area of performance, the farmer may be giving up some performance in the other. This leaves many farmers trying to find the perfect balance between flotation and traction.
LOAD AND INFLATION PRESSURE
Load has a significant impact on both compaction and traction. Although increasing the load will improve traction, it will also increase compaction, which has been a major concern as today’s farmers are carrying heavier loads than ever before. In the 1940s, the average weight of tractors on the market was about 3 tons, but it’s not uncommon for today’s high-powered tractors and heavy implements to weigh around 20 tons. As such, compaction has grown to be a major concern for farmers over the last few decades.
FINDING THE OPTIMUM FOOTPRINT
Increasing a tire’s footprint allows the weight to be distributed over a larger area, which reduces ground-bearing pressure and thus compaction. Removing weight from a tire will also decrease its footprint, so in order to maintain good flotation, it’s important to let some air out of the tire when taking off weight. When adding weight, it’s important to increase inflation pressure. Running a tire at inflation pressures that are insufficient to support the weight can lead to sidewall damage and other premature wear.
SELECTING THE RIGHT TIRE
Although bias tires are often the cost-conscious choice, radials are able to carry weight at lower inflation pressures, which means they will provide better flotation and cause less compaction. Similarly, a radial can carry more weight than a bias at the same inflation pressure. In some parts of the U.S., because of the type of crop, the tendency is to use taller and narrower tires that offer a longer footprint one to two additional lugs on the ground, resulting in increased traction. The larger tire chamber in these tires also means the tire will carry the same load with less air pressure, causing less compaction. Tall, narrow tires are often used in dual and triple setups, which further improve flotation and load capacity. With extra tires on the ground, the weight is distributed over more area, which leads to less compaction in its tracks. However, with more tires, there are more tracks, which isn’t always a good thing.
FINDING THE RIGHT SOLUTION FOR THE APPLICATION
Because most farmers aren’t willing to regularly change out tires or adjust their pressure based on regular changes in use or soil conditions, it’s important to base decisions on how the tire will be used the majority of the time. While some applications require superior traction, others require flotation.
OTHER SIMPLE TIPS FOR REDUCING COMPACTION
The leading cause of compaction is wheel traffic in wet soils. Studies have shown that the wetter the soil, the deeper the compaction occurs. When dry soil compacts 18 inches, wet soils will compact 24 inches, at the same axle load. In addition to wheel traffic, there are a number of causes of soil compaction that can be easily corrected, including persistent tillage operations at the same depth and lack of crop rotation. If tillage operations persist at the same depth over a period of time, a dense tillage pan can form below the tilled soil. Lack of crop rotation leads to little variation in root structure, which does not help to break up the subsoil.
BOTTOM LINE
Limiting compaction and slippage is a balancing act, and improving performance in one area may lessen the performance in the other. To a certain extent, farmers need to decide what is more important reducing compaction or increasing traction. Compaction could mean lower yields, while tire slippage could mean lower fuel efficiency. Deciding which outweighs the other is heavily dependent upon soil conditions, type of work being done and the load being carried. There are, however, several ways to minimize both compaction and slippage. By choosing a tire that can carry high loads at low inflation pressures (generally radial) and keeping the tires at the optimum footprint and inflation pressures for their average load, farmers will achieve the best results. Additionally, a farmer can reduce compaction by simply reducing wheel traffic in saturated soils, tilling at various depths and rotating crops as much as possible. Doing so will ensure reduced compaction and increased yield.
